Some time ago I reviewed Wild Country Helium quickdraws. At the time I just couldn’t find anything negative on them. I’ve used the quickdraws happily ever after. They’ve been great, but since the first article I have discovered some weaknesses too. The realization of the fact that quite a few pieces of quality gear also have several weaknesses led me to write this piece. At this point I want to stress the fact that each of the products and brands described in this article are extremely good and I could recommend any of them. Still I feel that it is important for climbers to realize the limitations and weaknesses of their gear and how to go around the weaknesses. Furthermore I feel that it is important that the manufactures hear the feedback from the field.
Picture above: Broken Wild Country Helium.
1. Berghaus Extrem gloves
Seams seem to tear apart in heavy use, especially with ropes. They would be great gloves, I love their dexterity and warmth but as their seams may tear apart during a single day, they just aren’t an option for ice climbing. Even while ski touring one needs to be careful when ever handling ropes.
2. Grivel Rambo 4 crampons
The yellow plastic of the active antibots breaks apart easily from its attachment; harder black plastic. I’ve seen this happen practically in every pair of Rambo’s I’ve seen. Despite the problem they’re best ice climbing crampons I know, and with a bit of patience one can fix the problem temporarily by pushing the plastic part back in place.
3. Wild Country Helium Quickdraws
The anti-slip rubber of Helium Quickdraws is too “hard” and therefore breaks in below zero temperatures from the stitching seam. I have a set of five of these and it has happened on everyone except one. Different type of rubber, for instance such that’s been used in Black Diamon’s Positrons would probably fix the problem. Though I like Heliums, they’re not currently the first choice for an ice climber.
4. Sigg Bottle cap
Threads of the cap get eaten by the bottle. To prevent this bottle should not be filled too full, the cap should not be tightened too tight and one should not allow the bottle to freeze.
5. North Face Summit Series Gore-Tex XCR jacket
The watertight zippers of the jacket wear down quite fast in below zero temperatures, especially if there’s plenty of use for the zippers.
6. Black Diamond Ice Clippers and their Xenos ice climbing harness
Ice Clippers slip through the clipper holders of Xenos after a while. In order to avoid that one should avoid too heavy loads (>five screws) and bending the clippers while packing it up. Still if the lip of the Ice Clipper would be just a bit longer or the clipper holder in the harness just a bit stiffer, it would work perfectly.
7. Grivel Manu backpack
The Manu concept, detachable gear loops, is great and I’m using it frequently. The problem though is that with the gear loops only (i.e. backpack removed) the velcro on the back of the gear loops sticks to everything and cause for instance slings to wear faster than I would hope. An extra sheet of something to put on top of the velcro will fix the problem, but perhaps that could integrated to the Manu somehow too.
Few images about the products mentioned:
Any comments and experiences of similar weak spots are greatly appreciated. I’m sure there are plenty of such around. It’s a great help for fellow climbers to be aware of them.
[...] Weak spots of quality gear [...]